Skip to content

Bowers & Wilkins CDA-4D DSP Amplifier

Save 30% Save 30%
Original price $2,000.00
Original price $2,000.00 - Original price $2,000.00
Original price $2,000.00
Current price $1,400.00
$1,400.00 - $1,400.00
Current price $1,400.00
Availability:
In-Stock
Have Questions or Need Advice?
Audiolab Advisor
Consult with a System Expert
From our PA Showroom

Free Shipping No Minimum

60-Day Returns

Have a Trade-In. Fill out our form

Bowers & Wilkins CDA-4D DSP Amplifier

High-power 4-channel / 2-zone custom-installation DSP power amplifier • 125W per channel into 8Ω / 250W per channel into 4Ω (all 4 channels driven) • 500W bridged mono mode into 8Ω • ultra-compact 1U rack-mountable chassis (1.75" height) with included rack ears • factory-calibrated DSP EQ presets for Bowers & Wilkins architectural, outdoor, & ISW subwoofers • full browser-based IP DSP configuration interface with 8-band parametric EQ, crossover filters, & delay alignment • flexible input matrixing with 2 stereo RCA analog inputs, 1 coaxial S/PDIF digital input, & 1 stereo RCA link output • 12V trigger, IP control, & audio-sensing power modes

The Bowers & Wilkins CDA-4D DSP Amplifier delivers high-current British amplification, precision acoustic DSP tuning, and ultra-compact 1U rack efficiency engineered specifically to unlock the full performance of Bowers & Wilkins custom-installation loudspeakers and architectural subwoofers. Delivering 125 watts per channel into 8 ohms and 250 watts per channel into 4 ohms across four discrete channels—and bridgeable into two 500-watt mono channels—this cool-running Class D powerhouse fits effortlessly into densely packed equipment racks while providing effortless dynamic headroom. Outfitted with pre-loaded acoustic EQ profiles tailored for Bowers & Wilkins CI300, CI600, CI700, CI800, Marine, AM-1 outdoor, and ISW architectural subwoofers—plus a comprehensive browser-based DSP suite offering 8-band parametric EQ, custom crossovers, and time alignment—it serves as a versatile cornerstone for whole-home audio, Dolby Atmos height amplification, or dual passive subwoofer systems.

Key Features & Innovations

  • 125W / 250W 4-Channel Power & 500W Bridged Output — the Bowers & Wilkins CDA-4D DSP Amplifier outputs 125 watts RMS per channel into 8 ohms and 250 watts RMS per channel into 4 ohms with all four channels driven simultaneously, and can be bridged to deliver 500 watts RMS x 2 into 8 ohms for high-output architectural subwoofers or flagship in-wall speakers.
  • Factory-Calibrated Bowers & Wilkins Loudspeaker DSP Presets — includes a built-in library of acoustic equalization and crossover profiles engineered by Bowers & Wilkins’ Steyning Research Establishment specifically for CI-series in-ceiling/in-wall models, AM-1 outdoor speakers, Marine speakers, and passive ISW subwoofers.
  • Full Browser-Based IP DSP & Input Matrixing — connects via Ethernet RJ45 to expose an intuitive web-browser setup dashboard featuring flexible input-to-output channel routing, 8-band parametric EQ per channel, high-pass/low-pass crossovers, dynamic limiters, and millisecond delay alignment.
  • Ultra-Slim 1U Rack-Mountable Class D Architecture — occupies just 1U (1.75 inches) of vertical rack space with high-efficiency Class D amplification and intelligent thermal management, allowing stackable installation without empty ventilation gaps.
  • Flexible Analog/Digital Inputs, Link Out & Automation — features two stereo RCA analog inputs, one coaxial S/PDIF digital input, and a stereo RCA link output for daisy-chaining additional amplifiers, paired with removable Phoenix speaker blocks, 12V trigger in/out, audio-sensing wake, and IP control.

FAQ — Bowers & Wilkins CDA-4D DSP Amplifier

Can the Bowers & Wilkins CDA-4D DSP Amplifier power passive architectural subwoofers?

Yes. By bridging two channels into 500 watts RMS at 8 ohms (or driving 4-ohm dual-subwoofer loads) and selecting the matching ISW subwoofer preset or custom low-pass crossover inside the browser DSP interface, the Bowers & Wilkins CDA-4D DSP Amplifier effortlessly powers up to two passive in-wall or in-ceiling subwoofers.

Do I need special proprietary software to configure the onboard DSP?

No. Simply connect the CDA-4D to your local network via its rear Ethernet port and access its built-in web configuration interface from any standard web browser on a laptop, tablet, or smartphone.

Can I use the CDA-4D with non-Bowers & Wilkins architectural speakers?

Yes. While it comes pre-loaded with bespoke acoustic profiles for Bowers & Wilkins speakers, you can select the flat/neutral preset or dial in custom parametric EQ curves, high-pass/low-pass filters, and gain trims for any 4-ohm or 8-ohm loudspeaker.

Are rack-mount ears and Phoenix speaker connectors included in the box?

Yes. Removable 1U rack-mount ears, mounting hardware, and removable 4-pin Phoenix speaker terminal blocks (accepting up to 12 AWG speaker wire) are included in the box.

Why Buy From Us

  • Authorized Bowers & Wilkins custom-installation and reference dealer offering 100% genuine factory-sealed amplifiers backed by full manufacturer warranty protection
  • Experienced architectural audio engineers available to advise on DSP loudspeaker preset selection, bridged subwoofer wiring, and multi-zone rack layouts
  • Dedicated post-purchase technical support for IP browser configuration, 12V trigger daisy-chaining, and Atmos height channel amplification
  • Fast, fully insured priority delivery in reinforced heavy-duty manufacturer protective packaging on every order
Free Shipping No Extra Costs
Free 60 Day Returns Return with Ease
Secure Checkout Secure Payment