Skip to content

MoFi Fender American Vintage Turntable

by MoFi
Original price $2,995.00 - Original price $3,995.00
Original price
$2,995.00
$2,995.00 - $3,995.00
Current price $2,995.00
Availability:
In stock
Cartridge No Cartridge
Have Questions or Need Advice?
Audiolab Advisor
Consult with a System Expert
From our PA Showroom

Free Shipping No Minimum

60-Day Returns

Have a Trade-In. Fill out our form

MoFi Fender American Vintage Turntable

Limited-edition American audiophile belt-drive turntable • solid swamp ash plinth finished by Fender® in iconic 3-Color Sunburst • 10-inch MoFi Ultra gimbal-bearing aluminum tonearm with VTA, azimuth, & anti-skate adjustment • massive 1.3-inch (33 mm) / 6.8 lb Delrin® platter with inverted hardened-steel bearing • isolated 300 RPM AC synchronous motor with two-step 33-1/3 & 45 RPM pulley • Harmonic Resolution Systems (HRS) vibration-damping isolation feet • optional factory-installed MoFi MasterTracker MM cartridge • serialized collector's badge • handcrafted in the USA

The MoFi Fender American Vintage Turntable unites Mobile Fidelity Electronics’ uncompromising reference-grade vinyl engineering with Fender Musical Instruments’ iconic American guitar-making craftsmanship in a limited-edition collector centerpiece. Handcrafted in the USA around a solid swamp ash plinth shaped and lacquered by Fender’s master luthiers in classic 3-Color Sunburst—the very tonewood and finish that defined legendary 1950s Stratocaster and Telecaster electric guitars—this belt-drive turntable delivers pitch-accurate analog realism and extraordinary resonance control. Anchored by a massive 6.8-pound, 1.3-inch-thick Delrin platter, an isolated 300 RPM AC synchronous motor, a precision 10-inch MoFi Ultra gimbal-bearing tonearm, and Harmonic Resolution Systems (HRS) anti-vibration feet, it brings studio master-tape fidelity into any listening room.

Key Features & Innovations

  • Solid Swamp Ash Plinth Finished by Fender® in 3-Color Sunburst — the MoFi Fender American Vintage Turntable features a dense, acoustically inert solid swamp ash body milled and hand-sprayed at Fender’s California facility in authentic 3-Color Sunburst finish, pairing vintage American luthier artistry with superior vibration damping.
  • 10-Inch MoFi Ultra Precision Gimbal-Bearing Tonearm — engineered by Allen Perkins with ultra-low-friction Japanese ball bearings, internal Cardas Audio wiring, and full adjustability for Vertical Tracking Angle (VTA), azimuth, tracking force, and anti-skating to extract maximum detail from every groove.
  • Massive 1.3-Inch (6.8 lb) Delrin® Platter & Inverted Bearing — utilizes a 33 mm thick, high-inertia Delrin polymer platter matched to the impedance of vinyl records, rotating smoothly on a hardened-steel inverted bearing with a sapphire thrust pad for vanishingly low noise floor and pitch stability.
  • Isolated 300 RPM AC Synchronous Motor (33-1/3 & 45 RPM) — mechanically decoupled from the swamp ash plinth via advanced elastomer mounts to prevent motor vibration from reaching the stylus, driving the platter via a stepped pulley for rock-solid 33-1/3 and 45 RPM playback.
  • Harmonic Resolution Systems (HRS) Vibration-Damping Feet — outfitted with four custom-engineered HRS isolation feet designed to dissipate structural footfall and airborne acoustic feedback before it can color delicate analog transients.

FAQ — MoFi Fender American Vintage Turntable

Does the MoFi Fender American Vintage Turntable include a built-in phono preamplifier?

No. Designed as a pure audiophile reference source, the MoFi Fender American Vintage Turntable outputs an unamplified cartridge signal via gold-plated rear RCA jacks and a dedicated ground post—pair it with an external MM/MC phono stage such as the MoFi StudioPhono, UltraPhono, or Parasound Zphono XRM.

Is a phono cartridge included with this turntable?

The turntable is offered either pre-configured with a factory-mounted and precision-aligned MoFi MasterTracker Moving Magnet cartridge (featuring a Micro-Linear stylus and V-Twin dual-magnet generator) or without a cartridge so you can install your preferred MM or MC cartridge.

How do I switch between 33-1/3 RPM and 45 RPM speeds?

Speed changes are performed manually with the motor switched off by moving the precision drive belt between the upper (33-1/3 RPM) and lower (45 RPM) steps on the machined Delrin motor pulley.

Is a dust cover included in the box?

Yes. A custom-fitted, removable clear hinged acrylic dust cover is included to protect the 3-Color Sunburst swamp ash finish and tonearm assembly when not in use.

Why Buy From Us

  • Authorized Mobile Fidelity Electronics reference dealer offering 100% genuine USA-crafted limited-edition turntables backed by full manufacturer warranty protection
  • Experienced analog vinyl specialists available to advise on cartridge alignment, VTA/azimuth calibration, and external phono stage gain matching
  • Dedicated post-purchase technical support for HRS isolation setup, belt maintenance, and stereo system integration
  • White-glove, fully insured priority delivery in reinforced heavy-duty manufacturer protective packaging on every order
Free Shipping No Extra Costs
Free 60 Day Returns Return with Ease
Secure Checkout Secure Payment