-
Home Audio Accessories
- All A/V Cables
- Speaker Cables
- Analog Interconnect Cables
- Digital Audio Cables
- HDMI Cables
- Power Cords
- Power Protection
- Speaker Stands
- Speaker Wall Mounts
- Acoustic Room Treatments
- Vibration Isolation
- Tweaks
- Subwoofer Accessories
- External Power Supply
- In-Wall / In-Ceiling Speaker Accessories
- Subwoofer Accessories
- Recommended Systems
Kanto TUK Powered Speaker (pair)
$799.00
-
- TUK utilizes high-performance AMT tweeters to deliver brighter, more accurate highs.
- Due to their high rigidity and low mass, TUK’s aluminum drivers operate at optimal efficiency while reducing distortion at higher volumes.
- Impressive Frequency Response of 40 Hz – 20 kHz and 130 watts of efficient Class “D” power, make these a great choice for the audiophile.
Description
Kanto TUK Powered Speaker (pair) – Kanto
The Kanto Tuk powered speaker with, USB DAC, dedicated phono pre-amp, Bluetooth and headphone jack
Delivering clarity and performance that put it in a class of its own, TUK is designed to push the limits on what a bookshelf speaker can achieve. Fine-tuned with onboard DSP, its high-performance AMT tweeters and 5.25” aluminum drivers produce sparkling highs and rich bass, bringing life to all your source material. Its active crossover further improves low-end resolution by filtering out sub-80Hz frequencies when connected to a subwoofer. Outfitted with dedicated phono, RCA and Optical TOSLINK inputs, a built-in USB DAC and headphone amp, and Bluetooth 4.2 with aptX HD and AAC codecs, TUK provides the flexibility you need to enjoy all your devices.
Features:
- AMT TWEETERS – TUK utilizes high-performance AMT tweeters to deliver brighter, more accurate highs. Their wide horizontal dispersion also offers improved stereo imaging and soundstage.
- ALUMINUM DRIVERS – Due to their high rigidity and low mass, TUK’s aluminum drivers operate at optimal efficiency while reducing distortion at higher volumes.
- DSP CONTROLLED – TUK features integrated digital signal processing (DSP), designed to optimize audio quality and provide greater accuracy in sound reproduction.
- ADVANCED CONNECTIVITY – Along with Optical and RCA inputs, TUK includes an independent phono input for your turntable, a USB DAC, a dedicated headphone amp, and Bluetooth 4.2 with aptX HD and AAC codecs for high fidelity streaming.
- ACTIVE CROSSOVER – When enabled, TUK’s active crossover filters out frequencies below 80Hz and sends them directly to a connected subwoofer. Off-loading this portion of the frequency range further improves resolution while reducing distortion.
- FULL CONTROL – Packed with functionality, TUK’s remote allows you to make quick input, volume, tone and balance adjustments, as well as control playback when streaming via Bluetooth®.
Specs
- Tweeter: Air Motion Transfer (AMT) tweeters
- Woofer: 5.25 inch Aluminum Concave drivers
- Nominal Impedance: 4 Ohms Nominal Impedance
- Amplifier Type: Class D Amplifier
- Power Output: 260W Peak Power (130 Watts Total RMS)
- Input Sensitivity: 360 mV
- Crossover Frequency: 2.7 kHz
- Crossover System: 2-way
- Frequency Response: 40 Hz – 20 kHz
- Inputs: Optical (TOSLINK) Audio, Bluetooth® 4.2 with Qualcomm® aptX™ HD and AAC codec
- Inputs continued: USB Audio Input, RCA input, Dedicated Phono Pre-amp RCA
- Outputs: Headphone output, Subwoofer output, USB charge port 5V 2.0A
- Speaker Terminals: Active to Passive Knurled Speaker Binding Posts
- Input Voltage/Frequency: AC 100V – 240V 50/60 Hz universal power supply
- Low-Pass Filter: When enabled, any frequencies 80 Hz and below are sent to SUB
- Standby Mode: Auto-Standby Mode
- Standby Power: < 0.5 W Standby Power Consumption
- Mounting Options: 1/4″-20 threaded hole on bottom for mounting
- Remote: Remote control included
- Construction: Acoustic grade MDF rear ported cabinets
- Assembly Required?: No
Dimensions and weight:
- 7 1/16″ wide x 10 7/8 deep x 10 15/16″ high
- Net Weight (Active Speaker): 11.1 lbs.
- Net Weight (Passive Speaker): 9.9 lbs.
What to expect in the box:
- (2) Kanto TUK Speakers
- Power cord
- Infrared remote
- (2) AAA batteries
- Banana plug speaker wire for speaker mate
- (2) Fabric speaker grille
- RCA to 3.5mm cable
- USB DAC Cable
- (8) Rubber feet
- Instruction Manual
Audiolab Stereo & Video Center
Additional information
Weight | 29 lbs |
---|---|
Dimensions | 22 × 14 × 16 in |
Color Choice |
Matte Black ,Matte White |
Reviews (0)
Rated 0 out of 5
0 reviews
Rated 5 out of 5
0
Rated 4 out of 5
0
Rated 3 out of 5
0
Rated 2 out of 5
0
Rated 1 out of 5
0
Be the first to review “Kanto TUK Powered Speaker (pair)”
You must be logged in to post a review.
Related products
Select options
This product has multiple variants. The options may be chosen on the product page
Select options
This product has multiple variants. The options may be chosen on the product page
Reviews
Clear filtersThere are no reviews yet.