-
Home Audio Accessories
- All A/V Cables
- Speaker Cables
- Analog Interconnect Cables
- Digital Audio Cables
- HDMI Cables
- Power Cords
- Power Protection
- Speaker Stands
- Speaker Wall Mounts
- Acoustic Room Treatments
- Vibration Isolation
- Tweaks
- Subwoofer Accessories
- External Power Supply
- In-Wall / In-Ceiling Speaker Accessories
- Subwoofer Accessories
- Clothing and Home Decor
Description
Esoteric S-05 Class-A stereo power amplifier with 60 watts per channel into 4 ohms
This amp is packed with cool features like dual monaural construction, a balanced input amplifier for noise-free signal transmission, and a bi-polar 3 parallel push/pull circuit that responds super fast to music signals. Plus, it’s got a large power transformer, high-capacity custom capacitors, and an ES-Link Analog input for super high-fidelity music signal transmission.
Key Features
Purity
The S-05 is a Class A stereo power amplifier that is thoroughly focused on the unique tone that can only be expressed by this model. It incorporates many of the development results of the flagship model “Grandioso M1X” to refine its overflowing driving power and pure performance. Class A amplifiers are dense with little distortion, this alone does not begin to describe the S-05’s appeal.
Vivid
Passionate and vivid colors, like a direct-heating tri-tube amplifier. The overwhelmingly high speed sound start-up, backed up by the abundant idling current. Powerful drive capability and open-ended dynamism…. Regardless of the amplification method, the S-05 is a new milestone in Class A amplifiers, a sincere pursuit of what an amplifier should be, and the culmination of ESOTERIC’s commitment.
Fidelity
With the flagship Grandioso C1X/M1X, ESOTERIC has challenged the limits of fidelity in pre-power transmission and opened up new horizons. ESOTERIC’s unique current transmission “ES-LINK Analog” is the ideal method for pre-power transmission, where signal levels are extremely low in actual use.
This Grandioso technology has been carried over to the S-05. Compared to conventional voltage transmission, ES-LINK Analog transmits approximately 100 times more current. Therefore, it is less susceptible to noise, and all the energy of the music is transmitted from the preamplifier to the power supply.
In addition, in principle, the output signal from the preamplifier and the input signal to the power amplifier are not affected by the impedance of the connecting cables, so the output signal from the preamplifier and the input signal to the power amplifier can be kept identical to each other to an extremely high degree.
ES-LINK Analog – ESOTERIC’s unique current transmission
Esoteric’s unique current transmission system “ES-Link Analog” is the ideal method for preamp to amplifier transmission where the signal level is extremely low. Compared to the conventional voltage transmission, it transmits approximately 100 times more current, making it less susceptible to noise and sending the full energy of the music to the amplifier.
Also, it is not affected by the impedance of the interconnects running between the preamp and amplifier, so it maintains a perfect integrity between the output signal of the preamp and the input signal to the amplifier.
In conventional voltage transmission, the output impedance of the source device is low, and the input impedance of the target device is high. In other words, the current required for signal transmission tends to be kept low.
Also, due to the resistance component (impedance) of the transmission path (interconnect cable), the voltage of the transmitted signal is attenuated by the level calculated by Ohm’s law (voltage = current × resistance) when delivered to the target device. Therefore, a longer the cable causes increased resistance which has significant affects on that signal.
In contrast, in current transmission, the output impedance of the source device is high and the input impedance of the input device is low, resulting in a “High out, Low in” circuit, and the current level is maintained higher during signal transmission than in voltage transmission, allowing a powerful audio signal delivery.
Also, in current transmission, the current level output from the source device always matches the one on the target device. Imagine using a hose to send water from a faucet to a bucket. As long as there are no holes in the hose, the same amount of water from the faucet will always flow to the bucket, regardless of the length of the hose.
Similarly, if the cable that serves as the transmission path is not divided into multiple paths, all current from the source device will be delivered to the target device, and the current values flowing will always be the same, even if the transmission path is longer.
This advantage of accurate transmission of even the smallest signals is evident from the fact that current transmission is widely used in measuring instruments that measure precise signals.
Conventional voltage transmission impedance of the ESOTERIC products is designed several tens of ohms on out-going circuits and around 100k ohms on in-coming circuits. In contrast, the ES-LINK Analog out-going/in-coming circuits are designed approximately 1kΩ on the out-going circuit, and 0Ω on the in-coming circuit.
If we focus on the current value that flows when transmitting audio signals, the current level of ES-LINK Analog transmission when transmitting audio signals at the same level as normal voltage transmission is approximately 100 times higher than the current level flowing in voltage transmission. Consequently, the high current level allows for the full energy of the music to be delivered.
Dynamics
The power is so overwhelming that its size is unimaginable. The source of this power is ESOTERIC’s carefully designed power supply. The power supply is the most important component in realizing a powerful and rich sound stage for the amplifier block, which always requires a large current for Class A operation.
Thanks to ESOTERIC’s unique power supply design, the S-05 boasts dynamic musical expression that transcends its size.
Bare mount over-sized power transformer
The S-05 uses the maximum capacity that can be installed (940VA EI core transformer). By using a transformer with a much larger capacity than the original product performance, the S-05 is able to follow dynamic changes in current supply extremely well, resulting in a dynamic and open sound. The suppression of transformer vibration also results in the suppression of current flow. For this reason, the transformer is bare-mounted without a case.
Power rectification circuit with dual mono configuration
Unless the sound source is monaural, the left and right music signals are different. The power rectification circuits are not shared by the left and right channels, but are dual mono circuits, which avoid mutual interference between the left and right channels, resulting in clear channel separation and resolution.
Multiple block capacitors in parallel
In the S-05, the rectification system also incorporates the special attention that is unique to this model. The block capacitors are Grandioso grade high quality custom capacitors. Dual mono and parallel configuration of four 10,000μF capacitors per channel is used. The rectification operation is time-delayed in parallel to stabilize charge and release, thereby ensuring a large current supply required for Class A operation at all times. Therefore, it can faithfully and agilely follow the dramatic changes in the music signal and fully express its dynamism.
Low impedance design
Critical wiring from the primary side to the power supply section, drive stage, etc., is bolted with extra thick cables. The response of the power supply is maximized by ensuring a low impedance.
Specifications
Speaker output | |
Rated output power | 30W + 30W (8Ω, Class-A) 60W + 60W (4Ω) 120W (BTL mode, 8Ω) |
Compatible Speaker Impedance | 4Ω to 16Ω 8Ω to 16Ω (BTL mode) |
Analog audio inputs | |
ESL-A | 1 pair |
XLR | 1 pair |
RCA | 1 pair |
General | |
Power consumption | 245W (210W at no signal) |
External dimensions (W×H×D) | 445 × 191 × 444mm 17-½” × 7-½” × 17-½” (including protrusions) |
Weight | 30.7kg / 67-¾ lb |
Included accessories | Power cord × 1 Felt pads × 4 Owner’s manual × 1 |
Audio performance
Frequency response | 5Hz to 100kHz (+0dB, –3dB, 8Ω) |
S/N ratio | 102dB (IHF-A, XLR) |
Total harmonic distortion | 0.007% (1kHz, 8Ω, 30W) |
Compatible Speaker Impedance | 4Ω to 16Ω 8Ω to 16Ω (BTL mode) |
Gain | 28.5dB |
I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Additional information
Color Choice |
Black ,Silver |
---|