Audio-Technica AT-VM95SP/H Headshell/Cartridge Combo Kit

Back-Ordered With An Estimated Availability in Early – Mid August.

The AT-VM95SP/H combo kit includes the AT-VM95SP dual moving magnet cartridge premounted on the AT-HS6BK headshell.

This VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

Features:

• VM dual magnet cartridge with 3.0 mil conical stylus
• Aluminum cantilever
• Specially wound coils increase output voltage
• Durable low-resonance polymer housing
• Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required
• Compatible with any AT-VMN95 replacement stylus
• Universal ½”-mount headshell for 4-pin turntable cartridges
• Specs
• Frequency Response: 20-20,000 Hz
• Channel Separation: NA
• Vertical Tracking Angle: 23°
• Vertical Tracking Force: 4.5-5.5 g (5.0 g standard)
• Stylus Construction: Bonded round shank
• Recommended Load Impedance: 47,000 ohms
• Coil Impedance: 3.3 k ohms (1 kHz)
• DC Resistance: 485 ohms
• Coil Inductance: 550 mH (1 kHz)
• Recommended load capacitance: 100 to 200 pF
• Output: 2.7 mV (1 kHz, 5 cm/sec.)
• Channel Balance: 1.5 dB (1 kHz)
• Stylus Shape: 3.0 mil conical
• Cantilever: Aluminum pipe
• Mount: Half-inch
• Weight: Cartridge 6.1 g (0.22 oz); Cartridge & Headshell 15.5 g (0.55 oz)
• Dimensions: Cartridge 17.2 mm (0.68″) H × 18.9 mm (0.74″) W × 28.3 mm (1.20″) D; Cartridge & Headshell 21.2 mm (0.83″) H × 21.4 mm (0.84″) W × 62.4 mm (2.46″) D
• Replacement Stylus: AT-VMN95SP
• Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers