Audio-Technica AT-LPW30 Fully Manual Belt-Drive Turntable – Audio-Technica
The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with black wood veneer to limit low-frequency acoustical feedback.
The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal ½”-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 60 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.
The AT-LPW30 is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.
Optimal High-Fidelity Audio Reproduction / Stylish Wood Turntable
A stunning addition to any system, the AT-LPW30 features an anti-resonance plinth with black wood veneer to limit low-frequency acoustic feedback.
Sophisticated Styling / Audio Aesthetics
The LPW30 was designed to give you optimal high-fidelity audio reproduction from vinyl, with sophisticated styling.
What to expect in the box:
- AT-LPW30 Fully Manual Belt-Drive Turntable
- AT-HS4SV Headshell
- AT-VM95C Dual Moving Magnet Cartridge with Conical Stylus Detachable RCA output cable (dual RCA male to dual RCA male)
- AC adapter
- 45 RPM adapter
- Counterweight
- Rubber mat
- Removable hinged dust cover
Product Details:
- Features
- Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
- Fully manual operation
- Adjustable dynamic anti-skate control
- Professional anti-resonance, die-cast aluminum platter with rubber mat
- AT-HS4 universal ½”-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
- AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
- Straight tonearm with hydraulically damped lift control and lockable rest
- Anti-resonance MDF (medium density fiberboard) plinth with black wood veneer
- Built-in switchable phono pre-amplifier for phono or line-level output
- AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
- Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover
- Specifications
- Type: 2-speed, fully manual operation
- Motor: DC servo motor
- Drive Method: Belt-drive
- Speeds: 331/3 RPM, 45 RPM
- Turntable Platter: Die-cast aluminum
- Wow and Flutter: < 0.15% WRMS (33RPM) at 3kHz
- Signal-to-Noise Ratio: > 60dB
- Output Level: Pre-amp: PHONO: 4.0mV nominal at 1kHz, 5cm/sec, Pre-amp: LINE: 200mV nominal at 1kHz, 5cm/sec
- Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized
- Power Supply Requirements: 100 to 240V, 50/60Hz
- Dimensions: 116.9 x 420.0 x 340.0 (H x W x Dmm)
- Weight: 5 kg
- AC Adapter: 12 V, 0.5 A
- Tonearm Type: Static balanced straight aluminum pipe tonearm
- Effective Arm Length: 223.6 mm
- Overhang: 18.6 mm
- Tracking Error Angle: <2 degrees
- Applicable Cartridge Weight: 12-17 g
- Replacement Stylus: AT-VMN95C
- Notes: Stylus pressure adjustment range: 0-3 g
- MPN: AT-LPW30BKR
- EAN: 4961310158491